Topping L50
€169.00*
% €229.00* (26.2% saved)In stock, delivery time: 1-3 days
Topping L50 - The big brother -
NFCA headphone amplifier
-Headphone connections 6.35mm and 4-pin XLR balanced
- Pass Through / Bypass Output
- Passes through signals even when switched off
- Hi-Res Audio certified
- Three gain levels
- NFCA modules
- <0.0006% THD+N
- 145dB DNR
- <0.3VRMS
- <0.1 Ohm output impedance
- Enormous output power of 2 x 3500mW at 16 ohms / 2 x 540mW at 300 ohms
Ulta-High Performance NFCA Module
The Topping L50 is based on the same Nested Feedback Composite Amplifier modules used in the flagship A90. This results in the ability to drive both high impedance and extremely low impedance headphones. It is therefore ideally suited for multi-channel IEM systems as well as large and power-hungry high-impedance headphones.
The Topping L50 delivers up to 3500mW per channel. To adapt the L50 ideally to the headphones in use, it has 3 gain stages. -14,3dB/-0,1dB/+13,9dB
This means it offers twice as much power as its little brother the L30.
2 x 3500mW at 16 Ohm
2 x 2800mW at 32 Ohm
2 x 2000mW at 64 Ohm
2 x 540 Watt at 300 Ohm
2 x 290mW at 600 Ohm
Thanks to NFCA technology, the power level is incredibly high. The Topping L50 owes this to enormously low noise floor values and distortions. The sound dynamics, on the other hand, are unusually high. Input Pass Through Even when the unit is switched off, the analogue input signal is passed through the analogue output. This makes sense if you are not using the Topping L50 and want to pass the signal on to a full amplifier or active loudspeaker, for example, without taking the L50 out of the chain.
The pass-through function is supported via the RCA and TRS input as well as via the RCA and TRS output.
An ideal and high-quality HiFi desktop combination results together with the Topping E50 digital analogue converter.
Topping L50 - The big brother -
NFCA headphone amplifier
-Headphone connections 6.35mm and 4-pin XLR balanced
- Pass Through / Bypass Output
- Passes through signals even when switched off
- Hi-Res Audio certified
- Three gain levels
- NFCA modules
- <0.0006% THD+N
- 145dB DNR
- <0.3VRMS
- <0.1 Ohm output impedance
- Enormous output power of 2 x 3500mW at 16 ohms / 2 x 540mW at 300 ohms
Ulta-High Performance NFCA Module
The Topping L50 is based on the same Nested Feedback Composite Amplifier modules used in the flagship A90. This results in the ability to drive both high impedance and extremely low impedance headphones. It is therefore ideally suited for multi-channel IEM systems as well as large and power-hungry high-impedance headphones.
The Topping L50 delivers up to 3500mW per channel. To adapt the L50 ideally to the headphones in use, it has 3 gain stages. -14,3dB/-0,1dB/+13,9dB
This means it offers twice as much power as its little brother the L30.
2 x 3500mW at 16 Ohm
2 x 2800mW at 32 Ohm
2 x 2000mW at 64 Ohm
2 x 540 Watt at 300 Ohm
2 x 290mW at 600 Ohm
Thanks to NFCA technology, the power level is incredibly high. The Topping L50 owes this to enormously low noise floor values and distortions. The sound dynamics, on the other hand, are unusually high. Input Pass Through Even when the unit is switched off, the analogue input signal is passed through the analogue output. This makes sense if you are not using the Topping L50 and want to pass the signal on to a full amplifier or active loudspeaker, for example, without taking the L50 out of the chain.
The pass-through function is supported via the RCA and TRS input as well as via the RCA and TRS output.
An ideal and high-quality HiFi desktop combination results together with the Topping E50 digital analogue converter.
