Topping DX7 Pro+
€699.00*
In stock, delivery time: 1-3 days
Topping DX7 Pro+
DAC and Headphone Amplifier – A Big Step Forward
- ESS ES9038Pro Digital Analogue Converter
- Hi-Res Audio certified
- Hi-Res Audio Wireless certified
- LDAC Blutooth 5.1 / support LDAC Transmission
- 0,00006% THD+N
- PCM/ DSD – USB support up to DSD512 & PCM768kHz
- Brand new I/V conversion
- Buld-in NFCA headphone amp
- RCA & XLR outputs
- Remote control
This time we did it better
Topping DX7 Pro+ uses ESS Sabre ES9038Pro with 32bit Hyper-stream architecture, achieves ultra-high performance in the audio field. Each channel of the DX7 Pro+ will be arranged in parallel by four conventional balance channels. This makes the performance of DX7 Pro+ even better
Brand new I/V conversion
A brand new I/V conversion circuit is designed for better quality audio reproduction. The unique circuit design provided lower distortion, lower noise while occupying less space. The new circuit is pushed close to the limit of physics, so that we can squeeze out the last bit of performance of the DAC chip.
Close to physical limits
The ability of Topping DX7 Pro+ to restore music has reached to THD+N<0,00006%. That means more and clearer details you can hear.
Brand new design
The new family-style design that has von IF, reddot and Goldenpin awards on DX5, combined with aluminum precision CNC technology, makes DX7 Pro+ a better part of your desktop.
Built-in NFCA Heapdhone amp
The new DX7 Pro+ has the NFCA circuit optimized for this unit, giving the ultra-low noise and distortion. It pairs with high sensitivity IEMs and power-hungry high impedance headphone nicely.
- 2 x 1900mW @ 32Ohm load
- 2 x 320mW @ 300Ohm load
- 127dB SNR
4-Pin-XLR, 4,4mm and 6,35mm outputs
Topping DX7 Pro+ has 3 output headphone jacks of 4-Pin-XLR, 4,4mm and 6,35mm to meet difference usages. Besides, with the help of two gain settings, the DX7 Pro+ could reach even wider adaption of different headphones.
Step volume control
The encoder makes the step volume control more accurate and convenient. Even if the volume is adjusted to a small volume, there will not be any channel balance problem.
Multiple output mode
By double-clicking the volume knob, you can choose from output modes: “Headphone Amp”, “Headphone Amp + Line Out”, “DAC, and “Pre-amplifier” to adapt to more application scenarios.
Selectable output
The Topping DX7 Pro+ has balanced XLR output and single ended RCA output. You can choose “XLR only”, “RCA only” or “XLR+RCA” output for different applications.
IIS input supports up to DSD512 native.
When there is a better interface, you can use the HDMI cable to directly send the IIS signal into the DX7 Pro+ ESS9038Pro for better decoding. IIS input can support up to OCM32bit/768kHz & DSD512 native. The IIS input provides phase settings, DSD channel settings and a DSD indicator pin selection setting, which are compatible with most digital interface on the market that use the HDMI interface to output IIS signals. (Cannot be used for HDMI interface of PC, TV and set-top boxes).
Plug and play – Turn your PC into a HiFi source
DX7 Pro+ has a wide range of compatibility. Windows10 and above, MAC, Linux, IOS, Android can be plug and play. The X7 Pro+ uses the 2nd generation 8-core Xmos XU208. USB Support up to PCM 32bit/768kHz native.
LDAC 24Bit/96kHz Bluetooth transmission
Topping DX7 Pro+ has the certification of Hi-Res Audio Wireless and LDAC. It uses the newest QCC5125 chipse to support LDAC/AAC/SSC/aptX/aptX LL/aptX HD/aptX Adaptive protocol. To get even better sound quality from Bluetooth, we abandon the built-in DAC of QCC5125 and connect its digital signal to ES9038Pro to decode.
12V Trigger interface
The DX7 Pro+ is equipped with a 12V Trigger interface, which can be set to active control (Trigger out) or passive control (Trigger in). With only one easy-to obtain 3,5mm to 3,5mm cable, the DX7 Pro+ can be turned on and off synchronously with other devices equipped with a 12 V Trigger interface.
Topping DX7 Pro+
DAC and Headphone Amplifier – A Big Step Forward
- ESS ES9038Pro Digital Analogue Converter
- Hi-Res Audio certified
- Hi-Res Audio Wireless certified
- LDAC Blutooth 5.1 / support LDAC Transmission
- 0,00006% THD+N
- PCM/ DSD – USB support up to DSD512 & PCM768kHz
- Brand new I/V conversion
- Buld-in NFCA headphone amp
- RCA & XLR outputs
- Remote control
This time we did it better
Topping DX7 Pro+ uses ESS Sabre ES9038Pro with 32bit Hyper-stream architecture, achieves ultra-high performance in the audio field. Each channel of the DX7 Pro+ will be arranged in parallel by four conventional balance channels. This makes the performance of DX7 Pro+ even better
Brand new I/V conversion
A brand new I/V conversion circuit is designed for better quality audio reproduction. The unique circuit design provided lower distortion, lower noise while occupying less space. The new circuit is pushed close to the limit of physics, so that we can squeeze out the last bit of performance of the DAC chip.
Close to physical limits
The ability of Topping DX7 Pro+ to restore music has reached to THD+N<0,00006%. That means more and clearer details you can hear.
Brand new design
The new family-style design that has von IF, reddot and Goldenpin awards on DX5, combined with aluminum precision CNC technology, makes DX7 Pro+ a better part of your desktop.
Built-in NFCA Heapdhone amp
The new DX7 Pro+ has the NFCA circuit optimized for this unit, giving the ultra-low noise and distortion. It pairs with high sensitivity IEMs and power-hungry high impedance headphone nicely.
- 2 x 1900mW @ 32Ohm load
- 2 x 320mW @ 300Ohm load
- 127dB SNR
4-Pin-XLR, 4,4mm and 6,35mm outputs
Topping DX7 Pro+ has 3 output headphone jacks of 4-Pin-XLR, 4,4mm and 6,35mm to meet difference usages. Besides, with the help of two gain settings, the DX7 Pro+ could reach even wider adaption of different headphones.
Step volume control
The encoder makes the step volume control more accurate and convenient. Even if the volume is adjusted to a small volume, there will not be any channel balance problem.
Multiple output mode
By double-clicking the volume knob, you can choose from output modes: “Headphone Amp”, “Headphone Amp + Line Out”, “DAC, and “Pre-amplifier” to adapt to more application scenarios.
Selectable output
The Topping DX7 Pro+ has balanced XLR output and single ended RCA output. You can choose “XLR only”, “RCA only” or “XLR+RCA” output for different applications.
IIS input supports up to DSD512 native.
When there is a better interface, you can use the HDMI cable to directly send the IIS signal into the DX7 Pro+ ESS9038Pro for better decoding. IIS input can support up to OCM32bit/768kHz & DSD512 native. The IIS input provides phase settings, DSD channel settings and a DSD indicator pin selection setting, which are compatible with most digital interface on the market that use the HDMI interface to output IIS signals. (Cannot be used for HDMI interface of PC, TV and set-top boxes).
Plug and play – Turn your PC into a HiFi source
DX7 Pro+ has a wide range of compatibility. Windows10 and above, MAC, Linux, IOS, Android can be plug and play. The X7 Pro+ uses the 2nd generation 8-core Xmos XU208. USB Support up to PCM 32bit/768kHz native.
LDAC 24Bit/96kHz Bluetooth transmission
Topping DX7 Pro+ has the certification of Hi-Res Audio Wireless and LDAC. It uses the newest QCC5125 chipse to support LDAC/AAC/SSC/aptX/aptX LL/aptX HD/aptX Adaptive protocol. To get even better sound quality from Bluetooth, we abandon the built-in DAC of QCC5125 and connect its digital signal to ES9038Pro to decode.
12V Trigger interface
The DX7 Pro+ is equipped with a 12V Trigger interface, which can be set to active control (Trigger out) or passive control (Trigger in). With only one easy-to obtain 3,5mm to 3,5mm cable, the DX7 Pro+ can be turned on and off synchronously with other devices equipped with a 12 V Trigger interface.