Topping DX1
€99.00*
In stock, delivery time: 1-3 days
Where it all started
Topping DX1 – DAC & Headphone Amp
- High-Res Audio certified
- 6,35mm and 3,5mm headphone output
- Velvet Sound newest AK4493S
- THD+N <0,0002%
- Supports up to DSD256 and PCM384
- XMOS XU208
- Almost no Jitter. Low as -160dB, close to measurement limit.
- No power supply required
D/A Converter AK4493S
The Topping DX1 uses the newest sub-flagship AK4493S chips of AKM´s Velvet sound technology. AK4493s is an upgraded version of the previous AK4493.
Plug and Play – Turn your PC into a HiFi source
Topping DX1 has a wide range of compatibility: Windows 10, Windows 11, MAC, Linux, IOS, Android can be used plug and play. Only for Windows ASIO applications, you need to install the driver and set it up. The USB hardware is based on XMOS XU208 and Thesycon custom driver (applicable to Windows, other systems are free if driver), which is stable and reliable.
No adapter required
Like other USB devices, the Topping DX1 does mot require an additional adapter for power supply. Only one USB cable can complete the power supply and data transmission.
Discrete LNRD
How to solve the noise problem from USB power? The Topping DX1´s answer is the Discrete LNRD circuit (low noise reference driver). The discrete LNRD circuit filters out the noise and interference of USB 5V power and provides stable and clean power supply of ultra-low noise reference level for DX1. With this technology, the noise of DAC part is lower than 2.0µV, and the noise of the AMP part is lower than 1.0µV. Even highly sensitive IEMs will not bother by noise.
Powerful output in a small hummingbird size
In such a tiny size, Topping DX1 can provide a maximum output of 280mW x 2 whitout additional power supply
280mW x 2 @32Ohm
190mW x 2 @64Ohm
51mW x 2 @300Ohm
Two gain settings
Topping DX1 provides two different gain settings, which greatly expands the range of headphone adaption.
Where it all started
Topping DX1 – DAC & Headphone Amp
- High-Res Audio certified
- 6,35mm and 3,5mm headphone output
- Velvet Sound newest AK4493S
- THD+N <0,0002%
- Supports up to DSD256 and PCM384
- XMOS XU208
- Almost no Jitter. Low as -160dB, close to measurement limit.
- No power supply required
D/A Converter AK4493S
The Topping DX1 uses the newest sub-flagship AK4493S chips of AKM´s Velvet sound technology. AK4493s is an upgraded version of the previous AK4493.
Plug and Play – Turn your PC into a HiFi source
Topping DX1 has a wide range of compatibility: Windows 10, Windows 11, MAC, Linux, IOS, Android can be used plug and play. Only for Windows ASIO applications, you need to install the driver and set it up. The USB hardware is based on XMOS XU208 and Thesycon custom driver (applicable to Windows, other systems are free if driver), which is stable and reliable.
No adapter required
Like other USB devices, the Topping DX1 does mot require an additional adapter for power supply. Only one USB cable can complete the power supply and data transmission.
Discrete LNRD
How to solve the noise problem from USB power? The Topping DX1´s answer is the Discrete LNRD circuit (low noise reference driver). The discrete LNRD circuit filters out the noise and interference of USB 5V power and provides stable and clean power supply of ultra-low noise reference level for DX1. With this technology, the noise of DAC part is lower than 2.0µV, and the noise of the AMP part is lower than 1.0µV. Even highly sensitive IEMs will not bother by noise.
Powerful output in a small hummingbird size
In such a tiny size, Topping DX1 can provide a maximum output of 280mW x 2 whitout additional power supply
280mW x 2 @32Ohm
190mW x 2 @64Ohm
51mW x 2 @300Ohm
Two gain settings
Topping DX1 provides two different gain settings, which greatly expands the range of headphone adaption.